September 25, 2022

A Guide To The Safe Use Of Beam Clamps

A Guide To The Safe Use Of Beam Clamps

Beam clamps lifting are simple and portable ways to attach a hoist to a runway. But before using them, make sure they are not damaged. This article will discuss some important tips for safe beam clamp use. You can find beam clamps in many different places, but it’s important to know how to use them safely so you don’t spend time, money, and frustration.

They should be checked before use:

There are several factors to check when using beam clamps for lifting. For one, make sure that they have the correct size. The correct size should align with the load’s centre of gravity to prevent it from swinging and possibly causing a serious accident. You should also check that the clamps have proper threading and Tommy bars. If these features are not present, you should replace them immediately.

They should be undamaged:

Beam clamps are a great way to secure lifting equipment to a beam without bolts or nuts. They are generally designed for in-line use, where the force is applied at right angles to the beam’s flange. For angled applications, you may need to consider additional clamps or accessories. Listed below are some of the most important safety tips. When using beam clamps, be sure to keep them dry and protected against corrosion. If you must use the clamps for a specific lifting application, be sure to reassemble the fasteners immediately after removing them from the beam.

They should be lubricated:

Beam clamps must be used appropriately to prevent damage to the structure and other accessories. The positioning of the beam clamp should align with the center of gravity of the hoisted load. A beam clamp is not suitable for a lifting job where the load is in a swaying position. This can cause serious injury and pose health and safety risks. Beam clamps must be used in the correct location and must not be dropped, thrown, or overturned.

They should be centered over the load:

Beam clamps should be centered over a load. They attach to a top flange of a beam and can range from one-quarter inch to seven-eighths of an inch in thickness. Beam clamps are available in many styles, sizes, and configurations. Before using them, ensure they are centered over the load and free of loose parts.